Raspberry Pi Camera / 5MP 8mm Focal Length Night Vision NoIR Camera Board with IR-CUT
Note: the raspberry pi 3 board is not included.
1 x 8mm lens Raspberry Pi IR-CUT Camera
1 x FFC Cable(15cm length)
Compatible with any generations of Raspberry Pi.
With built-in IR-CUT, it can fix the chromatic aberration problem when using in day, and has better image.
Support IR night vision if you use the IR Fill light (please refer to: LED Board)
Support adjustable focusing.
CMOS: 1/4” color CMOS QSXGA(5 megepixel) image sensor(OV5647);
Aperture (F) : 1.2;
Focal Length: 8mm;
Diagonal: 40 degrees;
4 screw holes: used for both attachment;
Support 3.3V power supply;
Support infrared LED and fill flash;
Dimension: 35mm x 35 mm.
You can use with Infrared IR LED Board，please refer to: LED Board
[How to change the models]
1/ RPi IR-CUT Camera works by default in normal mode.
2/ Run the command:s udo nano /boot/config.txt,and add disable_camera_led = 1 on the last line. After saving and restarting Raspberry Pi, Camera will work in night vision mode. To return to normal mode, simply delete disable_camera_led = 1, save and restart Raspberry Pi.
3/ To flexibly control the display mode, it can connect to the following locations by the Raspberry Pi GPIO interface, Through changing the GPIO level to switch between different modes (high for normal mode and low for night-vision mode).